• The Slimline Art Hanging System Wall Anchors for Track – Pack Shot
  • The Slimline Art Hanging System Wall Anchors for Track – Pack Shot
  • Slimline Art Hanging System Wall Anchors - Pack Contents Shot
  • Wall fixing kit for 2m track

Slimline Wall Anchors

$4.20

Pack of 5 Slimline Wall Anchors.  (1 pack required per 2 metre length of track)

Wall anchors allow for simple and clean wall installation.

A ‘wall fixing kit’ is now included with every pack of wall anchors.  The wall fixing kit includes:

  • 5 x 8 Gauge, 32mm Zinc Plated Self Tapping Screws
  • 5 x 30mm Masonry Wall Anchors
SKU: GSL.WALLP Categories: ,

Product Description

The Slimline Art Hanging System ‘Wall anchors’ are an essential component of the system which allow the track to be securely fixed to the wall.  The anchors are a strong nylon rectangular piece over which the track ‘snaps’ on.

Things to consider:

Design 

The anchors have been cleverly designed with tabs at the top which assist with vertical alignment when the track is to be installed against a cornice or ceiling.  In addition, owing to their rectangular nature, they are intended to be used where track may join to ensure everything neatly lines up.

Installation Information 

Installing the anchors is a simple job which is achieved with the included screws and masonry plugs (for cement or brick walls).  Whilst several different  approaches can be employed we generally recommend placing an anchor on every stud and then filling in the remain anchor points, such as track ends and joins, as required using ‘wall mates’.  Naturally, when installing on a masonry surface the anchors can simply be evenly placed.  Remember to allow a small space at the ends for any end caps.  Always read the included instructions before installation.

Specifications

Quantity per Pack

5

Included

Wall fixing kit (screws & masonry plugs)

System

Slimline Art Hanging System

Any questions?:

Please use the black chat box below to discuss any questions you have with our Australian based team.

Can the track be cut?

Yes, the track can be cut using a basic hacksaw. We use a 24tpi (teeth per inch) blade and achieve very neat cuts.

Can the track be joined?

Yes, cleverly no special joiners are required, we simply recommend placing a wall anchor at the join to ensure a neat and continuos look.

What is the weight rating of the track?

We don’t provide a per metre rating on the track. Naturally when suspending art one can either suspend a few large pieces (heavy) or many small pieces but either way a natural limit is reached. We do however provide a capacity rating for our droppers and hooks, provided these are adhered too (up to 14kg per dropper in the case of the Stainless Steel) the track will be more than capable.